Stubble tines
High elasticity and recovery of the initial geometry
Special boron steel.
Integral heat treatment
Use:Used for loosening the land, cutting and mixing the stubbles with the land.
Working depth: 12-20 cm.
The stubble tines are used on the stubble cultivators. Apart from the tine for the Horsch or Lemken farm machinery, Bellota also has more universal solutions with different hole patterns to hook up to the frame. The stubble cultivators loosen the land, cutting and mixing the stubble at a depth of about 20 cm.
Integral heat treatment
2823
| Ref. | G | A | B | C | M | Grs. | B | ₴ |
| 2441-CA2 | 60x25 | 812 | 83 | 45/80 | M12 | 9100 | 100 |
Fits with 1509 <
2441
| Ref. | G | A | B | C | M | Grs. | B | ₴ |
| 2447 | 45x15 | 467 | 45 | 45 | M10 | 2650 | 350 |
Use screw kit 1199Kit2447 to assemble with 15052. <
2447
| Ref. | G | A | B | C | M | Grs. | B | ₴ |
| 2444-865 A12 CA1 | 60x25 | 841 | 140 | 70 | M12 | 9800 | 100 | |
| 2444-865 A12 CA2 | 60x25 | 841 | 140 | 70 | M12 | 9800 | 100 | |
| 2444-865 A14 CA1 | 60x25 | 841 | 140 | 70 | M14 | 9800 | 100 | |
| 2444-865 A14 CA2 | 60x25 | 841 | 140 | 70 | M14 | 9800 | 100 | |
| 2444-865 A14 CA3 | 60x25 | 841 | 140 | 70 | M14 | 9800 | 100 |
2444 A12 fits with 1586-A 8 CA / 1587-A 10 CA / 1588 10 CA. <
2444 A14 fits with 1586-A 8 CA1 / 1587-A 10 CA1 / 1588 10 CA1 . <
2444
| Ref. | O. Ref. | G | A | B | C | M | Grs. | B | ₴ |
| 2446 A12 CA | 4653680 | 70x22 | 875 | 90 | 45 | M12 | 9800 | 100 |
Fits with Lemkem Smaragd. <
2446-A12
| Ref. | O. Ref. | G | A | B | C | M | Grs. | B | ₴ |
| 2823-A | 34060834 | 50x25 | 469 | 445 | 57-57 | M12 | 7700 | 100 | |
| 2823-B | 34060835 | 60x25 | 622 | 483 | 57-57 | M12 | 11100 | 70 | |
| 2823-C | 34060836 | 60x25 | 720 | 500 | 57-57 | M12 | 12200 | 65 |
Fits with 15055 - 15056 - 15057 - 15058. <
2823
