Clamps for double coil tines
From 50 up to 100 mm frame
Characteristics:
There is the possibility to develop new models according to customers’ requirements.
The Bellota clamps for the double coil tines or the double coil spring tines are suitable for cultivators with frames of 50x50 to 100x100. The table attached states which tine and frame profile is the most appropriate for each type of farm machinery. It is also important to bear in mind the size of the screw that holds the clamp to the frame of the cultivator.
12480-12486
| Ref. | H | c | Chasis | A | Grs. | M | ₴ |
| 12480-5050 | 60x10 | 20x20 | 50x50 | 24 | 740 | M12 | |
| 12480-6060 | 60x10 | 20x20 | 60x60 | 24 | 840 | M12 | |
| 12480-8080 | 60x10 | 20x20 | 80x80 | 24 | 1020 | M12 | |
| 12480-8080A | 60x10 | 20x20 | 80x80 | 24 | 1020 | M14 | |
| 12481-6060 | 80X14 | 25X25 | 60X60 | 12 | 1695 | M16 | |
| 12481-8080 | 80X14 | 25X25 | 80X80 | 12 | 2045 | M16 | |
| 12483-6060 | 80X14 | 27X27 | 60X60 | 12 | 1070 | M16 | |
| 12483-8080 | 80X14 | 27X27 | 80X80 | 12 | 2055 | M16 | |
| 12483-10060 | 80X14 | 27X27 | 100X60 | 12 | 2055 | M16 | |
| 12483-100100 | 80X14 | 27X27 | 100X100 | 12 | 2405 | M16 | |
| 12485-8080 | 90x15 | 32x32 | 80x80 | 12 | 2310 | M22 | |
| 12485-10060 | 90x15 | 32x32 | 100x60 | 12 | 2310 | M22 | |
| 12485-100100 | 90x15 | 32x32 | 100x100 | 12 | 2705 | M22 | |
| 12486-100100 | 100x15 | 35x35 | 100x100 | 12 | 3262 | M22 |
12480-12486
